Product Description

The Weidmuller 1506220000 ACT20P-CI-2CO isolates analogue standard current signals from a power source or from a 2- or 3-wire sensor. An analogue input current signal is converted linearly and doubled to provide two galvanically isolated output current signals. The power supply is galvanically isolated from the input and output (4-way isolation).

• HART-compatible for 0.5 – 2.5 kHz
• The active or passive mA signal inputs are fully galvanically isolated.
• Operating status display on a front panel LED

Product Highlights

This analog isolating amplifier doubles an analog input current signal to provide two galvanically isolated output current signals. It features 4-way isolation between input, output and supply.

Product Information

Standard Information

• Brand: Weidmuller
• Manufacturer Part Number: 1506220000
• Country of Origin: CN

Technical Specifications

• Version: Analogue isolating amplifier, Input : 0(4)-20 mA, Output : 2 x 0(4) – 20 mA, Voltage supply also via CH20M rail bus, HART
• Order No.: 1506220000
• Type: active
• GTIN (EAN): 4050118314724
• Depth: 113.7 mm
• Depth (inches): 4.476 inch
• Height: 127.1 mm
• Height (inches): 5.004 inch
• Width: 12.5 mm
• Width (inches): 0.492 inch
• Storage temperature: -40 C…85 C
• Operating temperature: -20 C…60 C
• Humidity at operating temperature: 0…95 % (no condensation)
• Humidity: 5…95 %, no condensation
• SIL in compliance with IEC 61508: None
• RoHS Compliance Status: Compliant with exemption
• RoHS Exemption (if applicable/known): 7a, 7cI
• REACH SVHC: Lead 7439-92-1
• SCIP: 2f6dd957-421a-46db-a0c2-cf1609156924
• Input current: 0…20 mA
  420mA
• Input signal: HART signal
  bidirectional
• Number inputs: 1
• Sensor: 2-wire transmitter (without own power supply)
  3-wire sensor
  4- wire sensor (with own power supply)
• Sensor supply: > 17 V DC at 20 mA
• Voltage drop: ca. 3.8 V @ R
• Load: = 600 ; (I
  input
  = 20 mA)
• Load impedance current: <300
• Number of outputs: 2
• Output current: 020 mA (if input: 020 mA)
  420 mA (if input: 420 mA)
  HART
  digital signal
• Accuracy: <0.1 % of end value
• Configuration: none
• Current consumption: 60 mA (24V power supply, 20mA output)
• Mounting rail: TS 35
• Nominal power consumption: 2 VA
• Operating altitude: 2000 m
• Protection degree: IP20
• Step response time: 0,5 ms
• Supply voltage: 2030 V DC
• Temperature coefficient: 80 ppm/K
• Type of signal forwarding according to HART: unchanged
• EMC standards: EN 61326-1
  EN 61000-6-2
  EN 61000-6-4
• Galvanic isolation: 3-way isolator
  between input output supply
• Impulse withstand voltage: 4 kV (1.2/50 s)
• Insulation voltage: 2 kV inputs / outputs / power supply
• Insulation voltage input or output/supply: 2 kV inputs / outputs / power supply
• Pollution severity: 2
• Surge voltage category: III
• Test voltage: 0.3 kV
• IECEx – gas labelling: Ex ec IIC T5 Gc
• Marking: II 3 G Ex ec IIC T5 Gc
• Type of connection: Screw connection
• Tightening torque, min.: 0.4 Nm
• Tightening torque, max.: 0.6 Nm
• Clamping range, rated connection: 2.5 mm
• Clamping range, min.: 0.5 mm
• Clamping range, max.: 2.5 mm
• Wire connection cross section AWG, min.: AWG 26
• Wire connection cross section AWG, max.: AWG 12
• Rated supply voltage DC (V): 24 – 24
• Number of input ranges 0 mA … 20 mA: 1
• Number of input ranges 4 mA … 20 mA: 1
• Number of output ranges 0 mA … 20 mA: 1
• Number of output ranges 4 mA … 20 mA: 1
• Power consumption (W): 2
• Temperature drift (%/K): 0.02
• Construction type of device: Field device
• Degree of protection (IP): IP20